Solar Pool Skimmers — What to Check Before Ordering B011, B012, B015 or B016

A solar pool skimmer is easy to explain and just as easy to oversell. Before a B Series order, we go through the same checks with buyers, because each one shapes what you can honestly promise in a listing.
Our B Series collects leaves, pollen, dust and other floating debris in outdoor residential pools. Catching that debris at the surface early also reduces the work of cleaning it from the floor later.
Read the runtime figure correctly
B011, B012 and B016 each use a 5200 mAh, 7.4 V battery with 4 cells. From a full charge, they run 25 hours in low-speed mode with no solar input. That figure does not include any solar charging, and it should not be quoted without the words "low-speed mode".
In sunlight, solar power supplies operation first and any surplus charges the battery. Continuous operation therefore depends on continued sunny weather. If cloudy or rainy days drain the battery, the skimmer stops and has to be charged with the external adapter, which takes about 3 hours. In markets with long overcast spells, say this plainly on the product page.
Match pool area, panel and basket
The three current models differ mainly in pool area, panel power, basket size and dimensions:
- B011: 200 m² pool area, 15.8 W solar panel, 4.5 L basket, 540×460×180 mm, 4.8 kg net, black or blue-purple.
- B012: 180 m² pool area, 9.4 W solar panel, 4 L basket, 520×460×190 mm, 4 kg net, silver.
- B016: 150 m² pool area, 12 W solar panel, 4 L basket, 415×335×170 mm, 3.2 kg net, silver.
The pool-area figure is a selection guide, not a fixed cleaning time; the actual pool shape and obstacles still decide the fit. Panel wattage is photovoltaic power, not motor or total unit power, so it should not appear in a listing as a motor rating. All three use a 200 µm filter, travel at 5–10 m/min, are rated IPX7 and work in pool water of 10–35 °C.
Be precise about app control
Control is by Bluetooth at about 15 m. Users can view solar charging and battery status, steer and switch speed modes, and they need to reconnect after a disconnection. A handheld remote control is not a standard item on these three models, and there is no internet control from another location.
Water-quality and temperature monitoring are not standard either. An app water-quality display can be discussed as part of a custom ODM project, agreed separately. If a listing mentions water quality, it should describe that custom version, not the standard product.
Check the pool for things that trap a skimmer
Floating cables can entangle a skimmer, and strong suction inlets or steps can trap it. The skimmer reverses, but reversing may not free it. Infinity pools need their boundary-sensing configuration assessed separately.
Our advice is to test the selected configuration against real pool conditions before you commit to claims in a listing. A short note on the product page about cables, strong inlets and steps also saves your customer service team from explaining it later.
Where B015 fits
B015 is a newer surface skimmer. It charges from its built-in solar panel while it works or by DC charging, cruises automatically using multiple sensors, and holds debris in a 200 µm filter basket. Like the rest of the series, it does not clean the pool floor. We publish a shorter specification for B015, so ask us for the full sheet before you plan it into a range.
Care, handling and ordering
The flow-through design draws floating debris into the collection system, where a roller brush, basket clearances and sealing help keep it in. The basket drains through its sides and can usually be rinsed under a tap. Brushless motors drive propulsion and the roller brush, ceramic bearings support durability in rotation, and TPR guide wheels help reduce rubbing marks on pool walls.
The solar panel can be damaged by impact, so it needs careful handling. Keep the panel, radar, impeller, roller brush and basket clean. For storage, the range is -20–45 °C at no more than 75% relative humidity, and the battery should get a full charge if a unit is stored for more than 3 months.
Logo and color OEM orders start at 100 units per model. Samples are charged at first, and the fee is refunded when a subsequent order reaches 100 units, including 100. Confirm certification requirements for your target market and configuration before ordering, and send us your pool types and quantities so we can suggest the right model.







