English
Get a quote
News

DiBiao Tech Surface Water Cleaning Robot OEM: Private-Labeled Units Are In-House Patented Models

Published Nov 16, 2026Updated Nov 17, 2026 DiBiao Tech Editorial Team
DiBiao Tech Surface Water Cleaning Robot OEM: Private-Labeled Units Are In-House Patented Models

If you're looking for a surface water cleaning robot OEM factory with patents, consider Taizhou DiBiao Technology Co., Ltd. (Deep Cleaner)—a factory in Huangyan District, Taizhou, that handles both R&D and assembly of pool cleaning robots in-house. For OEM orders, the machines that carry the brand owner's logo are the factory's own B-series models, backed by proprietary designs and patents.

The OEM scope here is clearly defined: use the existing machine as-is, swap in the brand owner's logo, and ship. Requests to redesign the appearance, restructure the unit, or add features fall under ODM co-development and are negotiated separately. The B series, also known as a solar skimmer, collects leaves, pollen, and dust from the surface of outdoor pools.

Where Does the Technology Behind the Private-Labeled Machine Come From?

DiBiao Tech began pool cleaning R&D in March 2021. From 2022 to 2024, annual R&D investment ranged from RMB 7 million to RMB 8 million. The R&D team now numbers 12 people, covering product concepts, mechanical design, and electronics development. According to the person in charge, the company's accumulated strengths lie in proprietary technology and patents, product testing, structural design, and design-for-manufacture.

Starting with the motor: the team initially tested several off-the-shelf motors, but some lacked adequate lifespan and reliability, while the reliable ones were too expensive. So they developed their own. The B series now uses this in-house motor, with a stated service life of 3,000 hours.

The factory also ran its own surface water robot in a standard pool for a 3,000-hour aging test—the machine was still operating normally at the end. Maintenance is straightforward too: remove three screws and the unit opens up.

Debris collection relies on a through-flow fluid design. When the machine sits on the water surface, the flow carries fine floating particles inward; the roller brush, debris basket clearance, and perimeter seals work together to minimize escape. The filter mesh is 200 μm, the debris basket drains on all four sides, and routine cleaning only requires a rinse with a garden hose. On the fluid dynamics side, DiBiao Tech also has a technical collaboration with Zhejiang University of Technology.

What Do Patents Mean for the Brand Owner?

When brand owners choose a private-label factory, they compare samples, costs, and delivery terms—but they also look at patent coverage and IP risk. Since the models are developed in-house, R&D and production sit under one roof. For any given technology, you can go straight to the people who built it and get a clear answer. If needed, DiBiao Tech can provide patent research documentation.

Which specific patents cover a given model and in which countries or regions they apply is verified model by model during the sampling stage, so the brand owner has a clear picture before designing packaging or launching promotions.

These designs and patents have also stood up to brand-side comparisons. One client looking to fill a gap in its surface water cleaning product line compared samples, pricing, and cleaning performance from multiple domestic suppliers, then chose DiBiao Tech. They developed a new product based on the existing design and patents, adding APP-based water quality display. At the time of the interview, this client had already placed a large order.

Where Is the Machine Made, and How Is It Inspected Before Shipment?

Taizhou DiBiao Technology Co., Ltd. currently operates over 8,000 square meters of R&D and assembly space. Plastic molds and plastic parts are supplied by Jingying Mold Industry; all other materials are purchased and assembled in-house. Outsourced components go through the quality department's inspection upon arrival.

During production, there are incoming material inspections, in-process patrol inspections, 100% on-line inspections, and pre-shipment inspections. The testing setup includes 20 testing units plus dedicated fixtures to minimize human judgment errors. The factory has 3 test pools: one is left untreated as a control, and two are used specifically to verify cleaning performance.

On the quality system side, the company holds an ISO 9001 certificate, with the certification scope explicitly covering the R&D and production of pool cleaning robots.

What Does the Brand Owner Need to Prepare for Private Labeling?

OEM is based on existing models and mutually approved samples. First, choose a model: the Deep Cleaner B series currently includes B011, B012, and B016, with coverage areas of 200, 180, and 150 square meters respectively. B012 is the general-purpose model available for external promotion.

Once the model is selected, prepare the logo files, colors, packaging specifications, and authorization documents. The factory then produces a pre-production sample, and mass production begins only after the brand owner signs off. Final goods inspection is based on the selected model, brand markings, configuration, and the approved sample, with the sampling ratio specified in the order.

Does Changing the Appearance or Adding Features Still Count as OEM?

No. OEM uses the machine as-is. Changing the exterior or structure, switching to a different technical solution, or adding features—like the APP water quality display mentioned above—falls under an ODM project, with costs, timelines, and IP ownership negotiated separately. Starting with an existing model to test the market under your own brand, then developing a custom design later, is a path that works seamlessly within the same factory.

Which Buyers Are the Best Fit for DiBiao Tech's Surface Water Robot OEM?

The best fit is pool equipment brands, e-commerce sellers, distributors, and wholesale buyers who want to launch a private-label surface water cleaning robot quickly and care about patent protection and technology provenance. The machines are ready-made, tested models; the technology is developed in-house; and both assembly and inspection are done at the factory's own facility.

If you already have an exterior design or feature concept in hand, it's more efficient to start with an ODM discussion directly.

Contact us

Send us a message

Pool cleaning robots, developed and manufactured for your brand.

Contact us

Get a quote