English
Get a quote
A Series Robotic Pool Floor Cleaners

A013 Robotic Pool Floor Cleaner

Model A013

Pool floor cleaning for 100 m² pools, with a 5200 mAh battery and 120–180 minutes of runtime from a full charge.

  • 100m²Pool area
  • 120–180minRuntime
  • 5200mAhBattery capacity
  • 2.5LDebris basket capacity
  • 36WMotor power
  • 3.5m³/hFiltration capacity

Our A013 robotic pool floor cleaner is our lead A Series model for brands, distributors, e-commerce sellers and wholesalers supplying small to medium residential pools. It collects leaves, sand, small stones and other everyday floor debris, with a 100 m² pool-area specification and a fully charged runtime of 120–180 minutes in the standard configuration.

Magnetic speed sensing adjusts propulsion power as the cleaner moves, reducing unnecessary thrust during normal travel and increasing thrust when turning or encountering a slope. Suction is handled separately through fluid design. The cleaner uses a 180 µm filter and a 2.5 L debris basket. It parks by the wall when a loaded filter slows it down or battery power is low, and still needs manual retrieval.

This is a pool floor cleaner for routine cleaning. Steps and slopes over 23° are unsuitable, and individual slopes at or below 23° still need assessment. Pits and narrow recesses may trap the cleaner. It does not provide wall climbing, active obstacle avoidance or path mapping.

A013 has a dark blue or royal blue body measuring 365×310×170 mm. Net weight is 3.8 kg and gross weight is 5 kg, with package dimensions of 440×340×195 mm. We confirm the configuration and pre-production sample before production.

We support Logo and color OEM orders from 100 units per model. Our own available stock can ship from 1 unit in its existing configuration. For A Series orders, stock orders within 20 units can be supplied from available stock; small batches produced from stocked raw materials take about 15 days, full-container orders about 30 days and peak-season production 45 days. Confirm the model, stock and schedule with us before ordering.

Use the original authorized charger, keep the charging port dry and fit the filter before cleaning. After removal, let the cleaner drain for 10–15 seconds. If it will be unused for more than 3 months, charge it to above 70% every 3 months.

Inside the A013

Hover or tap a point to see each part.

  1. Top-load debris basket2.5 L basket with a 180 µm filter under the transparent lid.
  2. Carry handlesLift the cleaner out by hand once it parks by the wall.
  3. Battery and drive5200 mAh battery, 120–180 min per charge, IPX8 waterproof.
  4. Bottom brushes2 brushes, travelling at 12–14.4 m/min across the pool floor.
A013 robotic pool floor cleaner in royal blue
Floor cleaning for residential pools up to 100 m².
Floor cleaning for residential pools up to 100 m².
Dark blue or royal blue body, 365 × 310 × 170 mm, 3.8 kg.
Dark blue or royal blue body, 365 × 310 × 170 mm, 3.8 kg.

Specifications

Model

Item code
DFC/RB/W003
Color
Dark blue / royal blue

Battery and power

Battery capacity
5200 mAh
Battery voltage
11.1 V
Battery arrangement
3.7 V 3S2P
Motor power
36 WMotor power; not total unit power
Battery cycles
800 cyclesFull charge for each cycle; operation in normal pool water

Cleaning

Pool area
100 m²Standard configuration; check pool shape and floor conditions
Runtime
120–180 minFully charged standard configuration; varies with pool shape and load
Filter mesh
180 µm
Debris basket capacity
2.5 L
Bottom brushes
2
Filtration capacity
3.5 m³/h
Travel speed
12–14.4 m/min

Operating conditions

Waterproof rating
IPX8
Water depth
2 m
Pool water temperature
5–35 °C
Storage temperature
-5–35 °C
Storage relative humidity
≤75 % RH
Pool floor restrictions
No steps; slopes over 23° are unsuitableAssess individual slopes at or below 23°; suitability is not universal

Charging

Charging time
2.5–3 hUse the original authorized charger and keep the charging port dry
Adapter output voltage
12.6 V
Charging current
1.8 A

Size and packaging

Product dimensions
365×310×170 mm
Net weight
3.8 kg
Gross weight
5 kg
Package dimensions
440×340×195 mm

FAQ

Can it climb walls, clean steps or handle every sloping floor?

No. It is designed for routine pool floor cleaning, with no wall-climbing function. Steps and slopes over 23° are unsuitable; slopes at or below 23° still require assessment. Pits and narrow recesses can cause it to become stuck.

Does wall parking mean the cleaner retrieves itself?

No. You still need to lift it out manually. It parks by the wall when the filter is loaded or battery power falls below 10%, making retrieval easier.

How does A013 differ from A012?

A013 and A012 have the same standard performance and mainly differ in appearance. A013 is our current lead model; check the dimensions, weights, packaging and certification requirements for the selected model.

Can I order samples and add my own Logo?

Yes. Samples are charged initially, and the sample fee can be refunded when a subsequent order reaches 100 units, including 100 units. Logo and color OEM orders start at 100 units per model. Our own available stock can ship from 1 unit without arbitrary configuration changes.

What warranty and after-sales support do you provide?

The warranty is 2 years in the EU and 12 months in other regions, starting from shipment. We provide operating and repair videos and spare-parts support to buyers and distributors; covered parts, repair or replacement arrangements and transport costs follow the agreed after-sales terms and contract.

Contact us

Send us a message

Pool cleaning robots, developed and manufactured for your brand.

Inquiry: A013

Contact us

Get a quote