English
Get a quote
News

Floor-Only Pool Robots — Setting the Right Expectations for A012 and A013

Published Nov 9, 2026 DiBiao Tech Editorial Team
Floor-Only Pool Robots — Setting the Right Expectations for A012 and A013

A floor-only robot does one job. When the listing describes that job accurately, the end user knows what to expect before the box arrives, and the product is judged on what it actually does.

A013 and A012 are our floor-only models. Below is what we tell buyers about them, and the wording we suggest for their own listings and manuals.

What they clean

Both models collect leaves, sand, small stones and other everyday debris from the pool floor. They share the same standard performance: a 100 m² pool-area specification in the standard configuration and 120–180 minutes of runtime from a full charge, depending on pool shape and load. Debris is held by a 180 µm filter and a 2.5 L basket, and two bottom brushes work the floor. Filtration capacity is 3.5 m³/h, and travel speed is 12–14.4 m/min.

Magnetic speed sensing adjusts propulsion as the cleaner travels, with less thrust in normal travel and more when turning or meeting a slope. The main difference between the two models is appearance: A013, our lead model, comes in dark blue or royal blue, and A012 is white.

What they don't do

These limits are worth stating before the sale, not after it:

  • No wall climbing. The cleaner stays on the floor and reverses when it meets the wall.
  • No steps or steep slopes. Steps are unsuitable, and so are slopes over 23°. Slopes at or below 23° need to be assessed one by one.
  • No active obstacle avoidance or path mapping. Pits and narrow recesses can trap the cleaner.
  • No self-retrieval. It parks by the wall when the filter is loaded or the battery falls below 10%, but someone still has to lift it out.
  • No surface skimming. Floating debris is the job of a surface skimmer such as our B011.

Which pools suit them

The best match is a residential pool of around 100 m² or less with a regular floor. That means no steps to clean, no slopes over 23°, and no pits or narrow recesses where the cleaner could get stuck. The listed water depth is 2 m, and pool water should be within 5–35 °C.

If wall cleaning matters to your customers, or their pools have steep transitions, a floor-only model is the wrong recommendation. It is better to point those customers to a floor-and-wall model such as A022 than to stretch the listing.

Outdoor pools that collect a lot of leaves are a different case. The floor cleaner still fits, but it helps to pair it with a solar skimmer: the B Series collects floating debris at the surface, and collecting it early reduces the burden of cleaning it from the floor later. A013 and A012 then have less to pick up from the floor.

How to describe them in a listing

Wording that stays within the specification:

  • "Robotic pool floor cleaner for leaves, sand and small stones"
  • "For pools up to 100 m² (standard configuration; check pool shape and floor)"
  • "120–180 minutes per full charge, depending on pool shape and load"
  • "Parks by the wall when the filter is loaded or the battery is low; lift it out by hand"
  • "Not for walls, steps or slopes over 23°"

Wording to leave out: wall cleaning, smart navigation, mapping, obstacle avoidance, automatic retrieval, and any fixed cleaning time. Each of these describes something the cleaner does not do, and each one can turn into a complaint once the robot is in the water. The same goes for images and video: show the cleaner working on the pool floor, not posed on a wall.

Care points to pass on

The care instructions are short, and they are worth repeating in the manual and on the listing:

  • Use the original authorized charger and keep the charging port dry. A full charge takes 2.5–3 hours.
  • Fit the filter before each cleaning.
  • After lifting the cleaner out, let it drain for 10–15 seconds.
  • If it will be unused for more than 3 months, charge it to above 70% every 3 months.
  • Store it at -5 to 35 °C and no more than 75% relative humidity.

The battery is rated for 800 cycles, each counted as a full charge in normal pool water. We support partners with operating and repair videos and spare parts, and local customer service and repair responsibilities are agreed with the buyer or distributor.

If you are planning a floor-cleaner listing for your market, send us an inquiry and we will help match the model to the pools you sell into.

Contact us

Send us a message

Pool cleaning robots, developed and manufactured for your brand.

Contact us

Get a quote