Adding a Copper Ion Generator to Your Range — How Our C01 Is Configured and Maintained

Our C Series consists of one product, the C01 pool copper ion generator. It is meant for pool accessory buyers who want to extend a water-care range, and it can be sourced alongside our A Series floor cleaners, such as A013, and our B Series solar skimmers, such as B011.
Copper ion products are easy to over-promise. Here is what C01 is, how we configure it, and the maintenance your customers need to plan for, so that your listing, manual and after-sales answers all say the same thing.
What C01 is, and what it is not
C01 is a copper ion generator for pool water care, offered with one or two copper-rod and spring sets. It is not a salt chlorinator, and it does not replace all pool disinfectants. The pool's other required disinfection and water-care measures stay in place while it is in use.
We do not offer a quantified disinfection rate, a fixed algae-removal time or a water-quality compliance guarantee for C01. Your listings and packaging should follow the same line. Present it as one part of a water-care routine, not as a replacement for one.
Where it sits next to our pool robots
Our A Series, B Series and C01 do different jobs. The A Series collects everyday debris from the pool floor, the B Series collects floating debris at the surface, and C01 belongs to water care. Keeping those jobs separate in your catalogue helps end users see C01 for what it is, rather than as another cleaning device. It also keeps claims in the right place: cleaning performance belongs to the robots, while C01 is described by its configuration and maintenance.
For buyers who already source floor cleaners or solar skimmers from us, adding C01 means one more line in the same conversation. Configuration, packing and delivery are still confirmed for the C01 order itself.
Single-set or double-set
C01 comes in two configurations, both in blue:
- Single set, item code DD/SPI001, with one copper-rod and spring set
- Double set, item code DD/SPI002, with two copper-rod and spring sets
The configuration for an order is agreed with you for the intended application. Tell us where and how the product will be used and the quantity you need, and we agree the configuration on that basis.
We then prepare a sample, and the approved sample becomes the basis for production acceptance and delivery. If a question comes up later about what was ordered, the approved sample is the reference both sides return to.
Copper-rod maintenance in practice
Copper-rod maintenance is part of normal use, not a sign of a fault. Two intervals matter:
- Clean the copper rod every 7–15 days.
- With the enlarged copper rod, replace it after about 6 months of normal use.
Both intervals depend on actual use and the condition of the rod, so treat them as guides, not fixed dates. A simple routine for end users is to look at the rod each time they clean it, and to replace it when its condition calls for it rather than waiting for the calendar.
Put both intervals in the manual and on the listing in plain terms. End users then know before they buy that C01 comes with a short routine: a rod clean every 7–15 days, and a replacement rod after about 6 months of normal use.
Planning orders and replacement rods
We quote C01 by configuration and quantity, and packing, delivery and replacement copper rods are confirmed for each order. Because the rod is replaced about every 6 months, replacement rods are a repeat item for your customers. It makes sense to agree a quantity of spare rods with the first order, so end users are not left searching for one when the time comes.
Logo and color OEM requests start at 100 units per model, and any additional development is agreed as a separate project. Samples are charged at first, and the sample fee is refunded when a subsequent order reaches 100 units, including 100.
What to tell end users
A short, accurate message works best in manuals and listings:
- C01 is a copper ion generator, not a salt chlorinator.
- Keep the pool's other disinfection and water-care measures in place.
- Clean the copper rod every 7–15 days, and replace the enlarged rod after about 6 months, depending on its condition.
- There is no promised disinfection rate or algae-removal time.
If you are adding C01 to a range alongside our pool robots, tell us the configuration and quantity you are considering, and we will prepare a sample for approval.







